网站地图 | 网站收藏 | 水箱博客
 
 
 

上海不锈钢水箱

发布时间:2013-01-05 21:00:01
 

上海不锈钢水箱特点                    
1、永不生锈:选用进口食品级不锈钢,具有较高的耐腐性。
2、重量轻:采用冲压成型工艺,以最小材料消耗达到高强度的使用要求,重量是钢板水箱三分之一。
3、理想的力学构造:从力学角度双成水箱的凸出部分采用了球体。
4、永不渗漏:独特的结构设计,全焊接现场结合。强度高,密封性好,防止水质二次污染。
5、可任意组合,保温施工容易:用户可根据设计需要提出水箱的长、宽、高(标准板块为1000mm×1000mm、1000mm×500mm、500mm×500mm)任意组合,安装现场无特殊要求,并可提供保温服务。
厂价直供不锈钢拼装式水箱模压块,欢迎联系订购或加工。提供拼装水箱不锈钢拉筋组装和焊接的技术指导。
不锈钢水箱专业厂家——宁夏济泉供水设备有限公司http://www.jiquans.cn欢迎大家访问

Shanghai stainless steel water tank characteristics
Never rust: selection of imported food grade stainless steel, has a higher corrosion resistance.
2, light weight: stamping molding process to achieve the requirements of high strength with minimal material consumption, weight is one-third of the steel water tank.
3, the mechanical structure of the ideal: From a mechanical point of view double into the protruding part of the tank with a sphere.
Never leak: unique structural design, site and fully welded. High strength, good sealing, to prevent secondary pollution of water.
5, can be any combination of insulation construction is easy: users can design needs long tank, wide, and high (standard plate for 1000mm × 1000mm, 1000mm × 500mm, 500mm × 500mm) any combination of the installation site no special requirements, and can be provide heat preservation services.
The Supplying assembled stainless steel water tank molded block exfactory welcome contact order or processing. Provide technical guidance assembled water tank stainless steel lacing assembly and welding.
Stainless steel water tank professional manufacturers - Ning Xia Jiquan Water Supply Equipment Co., Ltd. http://www.jiquans.cn, welcome everyone to visit

上一个产品:聚氨酯保温模块

下一个产品:四川不锈钢水箱